Current In Wire Scan Indicator HalboiTar

Hello.

To understand how the application works, watch the 15-second video.

• You can detect and trace wires within a wall.
• You can identify the presence of alternating current (50 Hz) in a single unpaired wire within urban or industrial networks.
• The circuit diagram is provided for reference.
• A current load of over 0.6 kilowatts will provide accurate current indication.
• Using the mentioned wiring circuit, you can determine wire layouts within walls.
• Whether the wire is neutral or phase, what matters is that current flows through one of them.
• Ideally, the current should exceed 3A, but lower currents are also detectable.
• In case of a broken cord inside a wall, there will always be one cord passing current through it to energize it.

It's sufficient to watch the 14-second video demonstration.

Additionally, you can scan metal objects only when using them as a ground for the alternating current (50 Hz). In double wiring setups, where both wire currents flow in opposite directions, standing waves cannot be identified.

Attention:

1. Exercise caution when handling electricity.
2. Not all phones are equipped with magnetic sensors capable of frequency measurements. The Samsung S4 was used during testing.

Thank you.